BRANDCRAFT Custom Design Model (Indent)
126454
1000
Description: Your custom design is expertly laser cut from an A4 sheet of Basswood, a lightweight and strong wood perfectly suited for crafting. The interlocking design means that pieces easily slot together and no tools are needed for assembly.
Custom designs are limited to 25 pieces printed on one A4 sheet of Basswood.
Presented in a brandable cardboard sleeve with assembly instructions, this is an engaging promotional product or gift for adults and children alike.
Step into a world of creativity and craftsmanship with BRANDCRAFT’s wooden models. Designed to unleash the inner child in any audience.
Colour: Natural
Dimensions:
- Flatpack Sheet: H 295mm × W 208mm × 2mm
- Sleeve: H 310mm × W 221mm
Packaging: Individual cardboard sleeve
Notes: Price breaks apply per colour and/or artwork design. Sample lead time is approximately 20 working days and production has a lead time of 30 working days from final sample approval.
Price: from AUD $7.09 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Brand: BRANDCRAFT
- Number of Components: Maximum of 25 pieces
- Recommended Ages: 8+ (Adult help may be required)
- Note: Basswood is a natural material which produces unavoidable variances in the grain pattern
- Note: Design will be assessed based on complexity and structural practicality prior to order acceptance
- Sampling: Sampling is required for this product and has a lead time of approximately 20 working days.
- Production Lead Time: Lead Time: 30 Working days from final sample approval
- Country Of Origin: China
- Flatpack Sheet: Basswood
- Sleeve: 250gsm Kraft Cardboard
-
Laser Engraving Wooden model: please refer to template×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Included Digital Print (black) Sleeve: please refer to template×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
Full Colour Print (Direct Digital) Wooden model×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
This item is made to order for any quantity required above MOQ - kindly note MOQ applies per artwork design.
Leadtime: Click here to see when you are likely to get your order.
